HP Mini 1000 HP Mini 1000 NetBook - Maintenance and Service Guide - Page 52
System board, system board and installed on the replacement system board
View all HP Mini 1000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 52 highlights
System board NOTE: The system board spare part kit includes a processor, USB board, and heat sink assembly. Description System board equipped with 1.6-GHz processor Spare part number 504592-001 Before removing the system board, follow these steps: 1. Shut down the device. If you are unsure whether the device is off or in Hibernation, turn the device on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the device. 3. Disconnect the power from the device by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the device. 4. Remove the battery (see Battery on page 30). 5. Remove the following components: a. Keyboard (see Keyboard on page 33) b. Hard drive or solid-state drive (see Mass storage devices on page 35) c. Top cover (see Top cover on page 37) When replacing the system board, be sure that the following components are removed from the defective system board and installed on the replacement system board: ● WLAN module (see WLAN module on page 40) ● RTC battery (see RTC battery on page 42) ● Bluetooth module (see Bluetooth module on page 43) ● Heat sink assembly (see Heat sink assembly on page 47) Remove the system board: 1. Disconnect the wireless antenna cables from the terminals on the WLAN module (see WLAN module on page 40). 44 Chapter 4 Removal and replacement procedures