HP Mini 1000 HP Mini 1000 NetBook - Maintenance and Service Guide - Page 45
Top cover, Remove the hard drive or solid-state drive see
View all HP Mini 1000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 45 highlights
5. Remove the bracket from the drive bay (4). The solid-state drive is attached to the underside of the bracket. Reverse this procedure to install the solid-state drive. Top cover Description Top cover (includes TouchPad) Spare part number 504612-001 Before removing the top cover, follow these steps: 1. Shut down the device. If you are unsure whether the device is off or in Hibernation, turn the device on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the device. 3. Disconnect the power from the device by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the device. 4. Remove the battery (see Battery on page 30). 5. Remove the keyboard (see Keyboard on page 33). 6. Remove the hard drive or solid-state drive (see Mass storage devices on page 35). Remove the top cover: 1. Turn the device upside down, with the front toward you. 2. Use a thin, flat tool to remove the four screw covers (1). Component replacement procedures 37