HP Pavilion p7-1500 Upgrading and Servicing Guide - Page 19
Installing a memory card, Upgrading and Replacing Memory
View all HP Pavilion p7-1500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 19 highlights
10. Holding the memory card by the edges, gently remove it from the slot. 2. Holding the memory card by the edges, press the card into the socket. Make sure the memory card is pressed completely into the socket, and then gently push down on the card until the retaining clips snap into place. 11. To remove additional memory cards, repeat steps 9 and 10. Installing a memory card NOTE: The replacement part may look different than the original part because of manufacturer or model differences; however, the replacement part meets or exceeds the specifications of the original part. 1. Orient the new memory card so that the notch in the memory card aligns with the tab in the socket. 3. If you are replacing more than one memory card, repeat step 2 for the second memory card. 4. Place the computer in an upright position. 5. Install the side panel on the side of the computer, and then slide it toward the front of the computer. NOTE: Make sure the panel is flush with the computer. Failure to do so might cause the panel to bend slightly outward and not close securely. Features may vary by model. Upgrading and Replacing Memory 17