HP Presario 3000 Compaq Presario 3000 Series Maintenance and Service Guide - Page 102
Removing the 1394 Board, Remove the PM2.5 × 4.0 screw
View all HP Presario 3000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 102 highlights
Removal and Replacement Procedures 2. Remove the tape 1 that secures the 1394 board cable to the base enclosure (Figure 5-26). 3. Disconnect the 1394 board cable from the system board 2. 4. Remove the PM2.5 × 4.0 screw 3 that secures the 1394 board to the base enclosure. 5. Remove the 1394 board 4. Figure 5-26. Removing the 1394 Board Reverse the preceding procedure to install the 1394 board. 5-32 Maintenance and Service Guide
5–32
Maintenance and Service Guide
Removal and Replacement Procedures
2. Remove the tape
1
that secures the 1394 board cable to the
base enclosure (Figure 5-26).
3. Disconnect the 1394 board cable from the system board
2
.
4.
Remove the PM2.5 × 4.0 screw
3
that secures the 1394 board
to the base enclosure.
5. Remove the 1394 board
4
.
Figure 5-26. Removing the 1394 Board
Reverse the preceding procedure to install the 1394 board.