HP Presario 3000 Compaq Presario 3000 Series Maintenance and Service Guide - Page 87
Heat Sink
View all HP Presario 3000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 87 highlights
Removal and Replacement Procedures 9. Release the ZIF connector 1 to which the keyboard cable is attached and disconnect the keyboard cable 2 from the system board (Figure 5-14). 10. Remove the keyboard 3. Figure 5-14. Removing the Keyboard Reverse the preceding procedure to install the keyboard and keyboard retainer. 5.9 Heat Sink Heat Sink Spare Part Number Information Heat sink 310647-001 1. Prepare the notebook for disassembly (Section 5.3). 2. Remove the LED switch cover (Section 5.7). 3. Remove the keyboard (Section 5.8). Maintenance and Service Guide 5-17
Removal and Replacement Procedures
Maintenance and Service Guide
5–17
9. Release the ZIF connector
1
to which the keyboard cable is
attached and disconnect the keyboard cable
2
from the
system board (Figure 5-14).
10. Remove the keyboard
3
.
Figure 5-14. Removing the Keyboard
Reverse the preceding procedure to install the keyboard and
keyboard retainer.
5.9 Heat Sink
1. Prepare the notebook for disassembly (Section 5.3).
2. Remove the LED switch cover (Section 5.7).
3. Remove the keyboard (Section 5.8).
Heat Sink
Spare Part Number Information
Heat sink
310647-001