HP Presario 3000 Compaq Presario 3000 Series Maintenance and Service Guide - Page 90
Heat Sink Screw Tightening Sequence
View all HP Presario 3000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 90 highlights
Removal and Replacement Procedures ✎ The heat sink screws should be loosened and tightened in the 1, 2, 3, 4 sequence stamped into the heat sink metal. The screw 5 next to the fan should be loosened and tightened last (Figure 5-17). Figure 5-17. Heat Sink Screw Tightening Sequence Reverse the preceding procedure to install the heat sink. 5-20 Maintenance and Service Guide
5–20
Maintenance and Service Guide
Removal and Replacement Procedures
✎
The heat sink screws should be loosened and tightened in the
1
,
2
,
3
,
4
sequence stamped into the heat sink metal. The screw
5
next to the fan should be loosened and tightened last
(Figure 5-17).
Figure 5-17. Heat Sink Screw Tightening Sequence
Reverse the preceding procedure to install the heat sink.