HP Pro 3000 Hardware Reference Guide - HP Pro 2000 and 3000 Series Microtower - Page 21
Removing an Optical Drive, CAUTION,
View all HP Pro 3000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 21 highlights
Removing an Optical Drive CAUTION: All removable media should be taken out of a drive before removing the drive from the computer. To remove an optical drive: 1. Remove/disengage any security devices that prohibit opening the computer. 2. Remove all removable media, such as compact discs or USB flash drives, from the computer. 3. Turn off the computer properly through the operating system, then turn off any external devices. 4. Disconnect the power cord from the power outlet and disconnect any external devices. CAUTION: Regardless of the power-on state, voltage is always present on the system board as long as the system is plugged into an active AC outlet. You must disconnect the power cord to avoid damage to the internal components of the computer. 5. Remove the access panel and front bezel. 6. Disconnect the power cable (1) and data cable (2) from the rear of the optical drive. Figure 15 Disconnecting the Power and Data Cables Installing Additional Drives 15