HP Pro 3085 Maintenance & Service Guide: HP Pro 3005/3015/3085 Business PC - Page 72
Front I/O and USB Panel Housing Assembly
View all HP Pro 3085 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 72 highlights
Front I/O and USB Panel Housing Assembly 1. Prepare the computer for disassembly (Preparation for Disassembly on page 32). 2. Remove the access panel (Access Panel on page 33) 3. Lay the computer on its side with the front facing toward you. 4. Remove the front bezel (Front Bezel on page 34). 5. Unplug the four cables that connect the assembly to the system board. The assembly cables connect to the following system board connectors: ● F_AUDIO - yellow ● F_USB1 - white 6. Remove the screw (1) that secures the housing to the chassis, slide the housing up (2), and then pull the assembly away from the chassis while guiding the cables through the hole in the chassis. To install the housing assembly, reverse the removal procedures. 64 Chapter 6 Removal and Replacement Procedures Microtower (MT) Chassis