HP Pro Mini 400 G9 Desktop PC Maintenance and Service Guide - Page 31

Match the notch on the module with the tab on the memory socket, and then pull the module out

Get HP Pro Mini 400 G9 Desktop PC PDF manuals and user guides View all HP Pro Mini 400 G9 Desktop PC manuals
Add to My Manuals
Save this manual to your list of manuals

Page 31 highlights

● In any mode, the maximum operational speed is determined by the slowest SODIMM in the system. Before replacing the memory modules, follow these steps: 1. Prepare the computer for disassembly (see Preparation for disassembly on page 20). 2. Remove the access panel (see Access panel on page 20). Replace a memory module: 1. Tilt the fan up and leave it in the upright position. 2. Remove the protective shielding from the top of the memory modules (1). 3. Press outward on the two latches on each side of the memory module (2), and then pull the module out of the socket (3). 4. Match the notch on the module with the tab on the memory socket (1). Slide the new module into the socket at approximately a 30° angle, and then press the module down (2) so that the latches lock it in place. 24 Chapter 4 Removal and replacement procedures

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
●
In any mode, the maximum operational speed is determined by the slowest SODIMM in the system.
Before replacing the memory modules, follow these steps:
1.
Prepare the computer for disassembly (see
Preparation for disassembly
on page
20
).
2.
Remove the access panel (see
Access panel
on page
20
).
Replace a memory module:
1.
Tilt the fan up and leave it in the upright position.
2.
Remove the protective shielding from the top of the memory modules
(1)
.
3.
Press outward on the two latches on each side of the memory module
(2)
, and then pull the module out of
the socket
(3)
.
4.
Match the notch on the module with the tab on the memory socket
(1)
. Slide the new module into the
socket at approximately a 30° angle, and then press the module down
(2)
so that the latches lock it in
place.
24
Chapter 4
Removal and replacement procedures