HP Pro Mini 400 G9 Desktop PC Maintenance and Service Guide - Page 46
Disconnect the speaker cable from the system board, Remove the system board
View all HP Pro Mini 400 G9 Desktop PC manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 46 highlights
Before removing the system board, follow these steps: 1. Prepare the computer for disassembly (see Preparation for disassembly on page 20). 2. Remove the access panel (see Access panel on page 20). 3. Remove the fan (see Fan on page 26). 4. Remove the memory modules (see Memory modules (SODIMMs) on page 22). 5. Remove the solid-state drive (see Solid-state drive on page 28). 6. Remove the WLAN module (see WLAN module on page 30). 7. Remove the heat sink (see Processor heat sink on page 36). 8. Remove the processor (see Processor on page 37). 9. If installed, remove flex I/O connector board #1 (see Flex I/O connector board #1 on page 33). 10. If installed, remove flex I/O connector board #2 (see Flex I/O connector board #2 on page 34). 11. If installed, remove the hard drive and drive cage (see Hard drive and drive cage on page 27). Remove the system board: 1. Disconnect the speaker cable from the system board (1). 2. Remove the three Torx screws (2) that secure the system board to the computer. NOTE: System board appearance might vary. System board 39