HP ProLiant 3000 Compaq ProLiant Cluster HA/F100 and HA/F200 Administrator Gui - Page 83
Setting Up a Private Interconnect, Ethernet Direct Connect
View all HP ProLiant 3000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 83 highlights
3-10 Compaq ProLiant Clusters HA/F100 and HA/F200 Administrator Guide Setting Up a Private Interconnect There are four ways to set up a private interconnect. s Ethernet direct connect s Ethernet direct connect using a private hub s ServerNet direct connect s ServerNet direct connect using a switch Ethernet Direct Connect An Ethernet crossover cable is included with your Compaq ProLiant Cluster. This cable directly connects two Ethernet cards. Place one end of the cable in the interconnect (Ethernet) card in Node1 and the other end of the cable in the interconnect card in Node2. IMPORTANT: Place the cable into the interconnect cards and not into the Ethernet connections used for the network clients (the LAN). NOTE: The crossover cable will not work in conjunction with a storage hub.