HP ScanJet Enterprise 7000 User Guide - Page 31

Clean the paper path, Maintenance, Clean

Get HP ScanJet Enterprise 7000 PDF manuals and user guides View all HP ScanJet Enterprise 7000 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 31 highlights

4. Dry the scanning strips with a dry, soft, lint-free cloth, making sure to wipe the small strips of gray reflective material on each strip. 5. Close the document feeder hatch, reconnect the USB cable and power supply to the scanner, and then press the Power ( ) button to turn on the scanner. Clean the paper path If scanned images have streaks or scratches, use an HP paper path cleaning cloth to clean the paper path. NOTE: If you experience repeated document jams, clean the rollers. To clean the paper path, follow these steps: 1. Open the sealed HP paper path cleaning cloth container, starting at the notch. Take care not to tear the cleaning cloth. 2. Remove the cleaning cloth and unfold it. 3. Place the unfolded cloth into the document feeder. 4. Press the Tools ( ) button to open the HP Scanner Tools Utility, and then click the Maintenance tab. 5. Under Clean Paper Path, click Clean to feed the cloth through the scanner. CAUTION: Wait two minutes for the components to dry before proceeding to the next step. 6. Place up to five pages of printed paper in the scanner. Scan and view the results. ENWW Clean the paper path 25

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
4.
Dry the scanning strips with a dry, soft, lint-free cloth, making sure to wipe the small strips of gray
reflective material on each strip.
5.
Close the document feeder hatch, reconnect the USB cable and power supply to the scanner, and
then press the Power (
) button to turn on the scanner.
Clean the paper path
If scanned images have streaks or scratches, use an HP paper path cleaning cloth to clean the paper
path.
NOTE:
If you experience repeated document jams, clean the rollers.
To clean the paper path, follow these steps:
1.
Open the sealed HP paper path cleaning cloth container, starting at the notch. Take care not to
tear the cleaning cloth.
2.
Remove the cleaning cloth and unfold it.
3.
Place the unfolded cloth into the document feeder.
4.
Press the Tools (
) button to open the HP Scanner Tools Utility, and then click the
Maintenance
tab.
5.
Under
Clean Paper Path
, click
Clean
to feed the cloth through the scanner.
CAUTION:
Wait two minutes for the components to dry before proceeding to the next step.
6.
Place up to five pages of printed paper in the scanner. Scan and view the results.
ENWW
Clean the paper path
25