HP Scanjet Enterprise 7000n HP Scanjet Enterprise 7000n - (multiple language) - Page 9
Set up the product - network scanner
View all HP Scanjet Enterprise 7000n manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
Back of product English 1 2 3 456 1. Power switch 2. Power connector 3. USB ports 4. Network link speed indicators 5. Ethernet port 6. Covered Ethernet port for service access Set up the product Complete the following tasks in order to set up the scanner hardware and prepare it for use. Connect the power supply The green LED on the power supply case is on when the power supply is functioning correctly. 1. Connect the power supply to the power supply cable, and then plug the power supply cable into a power outlet or a surge protector. 2. Check that the green LED on the power supply case is on. ● If the green LED is not on, ensure that power is available to the power outlet or surge protector that the power supply cable is plugged into. ● If power is available to the power outlet or surge protector but the green LED is still not on, the power supply might be defective. Contact HP Support for assistance. Starting up 3