HP StorageWorks 16-EL Fabric OS V3.1.1X Release Notes - Page 12

Important Notes This section describes important, late-breaking updates associated with the Fabric OS v3.1.1x release. Configdefault Command Warning HP advises against using the configdefault command. Executing the configdefault command applies Factory Test defaults to the switch. The Factory Test defaults differ from HP defaults. If you should execute the configdefault command, you will need to reapply the HP defaults to the switch. Note: All of the HP switches listed ship with HP default settings applied. For the SAN Switch 2/8, 2/8 EL, 2/16, or 2/16 EL Switches To reapply both the default HP-specific Fabric Watch parameters and the default HP-specific configuration parameters: 1. Locate the HP StorageWorks SAN Switch Software CD that shipped with your switch. This Software CD contains the HP default settings (also known as the configuration file). 2. Use the configdownload command to download the configuration file to your switch. For the HP StorageWorks SAN Switch 2/8 and 2/8 EL, use the HPSAN208 file to reload HP default settings. For the HP StorageWorks SAN Switch 2/16 and 2/16 EL, use the HPSAN216 file to reload HP default settings. 12 Fabric OS Version 3.1.1x Release Notes