HP StorageWorks 2/16V HP StorageWorks Fabric OS 5.2.0b Release Notes (AA-RWEYB - Page 21

Manager, Web Tools, and/or SMI-A will

Get HP StorageWorks 2/16V - SAN Switch PDF manuals and user guides View all HP StorageWorks 2/16V manuals
Add to My Manuals
Save this manual to your list of manuals

Page 21 highlights

Closed defect summary Solution ISCSI: a command does not exist to report Fixed per Fabric OS 5.2.0b current iSNS status. On a SilkWorm 48000, the rtedebug cli Fixed per Fabric OS 5.2.0b returns error: REASON: ROUTE_ABSENT for a device connected to FC4-48 port blade. After extended stress testing with repeated slotpoweroff/on on two FC4-16IP blades, ICPD stopped by kSWD and switch CP failed over. Fixed per Fabric OS 5.2.0b SupportSave fails with illegal Option -s saving CORE_FFDC If not upgrading to Fabric OS 5.2.0b, the workaround is to change the switch name to exclude space characters. Ports 32-47 on an FC4-48 port blade come up as G-ports for certain third-party storage arrays. If not upgrading to Fabric OS 5.2.0b, the workaround is to use ports 0 - 31 on the FC4-48 blade as a workaround if the HBA uses previously assigned PID in the SID of the FLOGI. Some operations initiated from Fabric Manager, Web Tools, and/or SMI-A will fail if the system switch is running Fabric OS v5.2.0a for more than 30 days. If not upgrading to Fabric OS 5.2.0b, the workaround is to reboot the switch or run the operation from the CLI rather than the management tool. Fabric OS 5.2.0b 21

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
Closed defect summary
Solution
ISCSI: a command does not exist to report
current iSNS status.
Fixed per Fabric OS 5.2.0b
On a SilkWorm 48000, the rtedebug cli
returns error: REASON: ROUTE_ABSENT for
a device connected to FC4-48 port blade.
Fixed per Fabric OS 5.2.0b
After extended stress testing with repeated
slotpoweroff/on on two FC4-16IP blades,
ICPD stopped by kSWD and switch CP
failed over.
Fixed per Fabric OS 5.2.0b
SupportSave
fails with illegal Option -s
saving CORE_FFDC
If not upgrading to Fabric OS 5.2.0b, the
workaround is to change the switch name to
exclude space characters.
Ports 32-47 on an FC4-48 port blade come
up as G-ports for certain third-party storage
arrays.
If not upgrading to Fabric OS 5.2.0b, the
workaround is to use ports 0 - 31 on the
FC4-48 blade as a workaround if the HBA
uses previously assigned PID in the SID of
the FLOGI.
Some operations initiated from Fabric
Manager, Web Tools, and/or SMI-A will
fail if the system switch is running Fabric OS
v5.2.0a for more than 30 days.
If not upgrading to Fabric OS 5.2.0b, the
workaround is to reboot the switch or run
the operation from the CLI rather than the
management tool.
Fabric OS 5.2.0b
21