HP StorageWorks 2/32 Brocade Web Tools Administrator's Guide - Supporting Fabr - Page 162
Viewing and configuring EX_Ports
View all HP StorageWorks 2/32 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 162 highlights
10 Viewing and configuring EX_Ports For Brocade switches, this launches Web Tools. For non-Brocade fabrics, this launches the element manager for that switch. FIGURE 60 FC Routing module with LSAN Fabrics tab selected Viewing and configuring EX_Ports The EX_Ports tab (see Figure 61 on page 141) displays all of the EX_Ports on the switch, including configuration and status information. The ports are sorted by slot number, and then by row number within each slot. IP addresses information is displayed in both IPv4 and IPv6 format. NOTE If FC Routing is disabled, then you have to disable all of the EX_Ports and you cannot enable them until FC Routing is enabled. For more detailed information about a specific port, click a port name in the table and then click View Details in the task bar. You can also click the port name in the tree on the left side of the window. From the EX_Ports tab, you can perform the following port management tasks by selecting a port in the table and then clicking a task in the task bar: • "To configure an EX_Port" on page 141 • "To edit the configuration of an EX_Port" on page 142 • Rename an EX_Port. • Swap the Port Index of an EX_Port (described in "Swapping port index" on page 75). 140 Web Tools Administrator's Guide Publication Number: 53-1000435-01