HP StorageWorks 2/32 Brocade Access Gateway Administrator's Guide - Supporting - Page 23
Disable, Switch Status, Enable, Access Gateway Mode, Apply, Con gt; Upload/Download
View all HP StorageWorks 2/32 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 23 highlights
Enabling Access Gateway mode 2 The Switch Admin module displays as shown below. Note To save the switch configuration, go to the Configure > Upload/Download subtab and upload the configuration file before proceeding with the next step. 3. Click the Disable radio button in the Switch Status section. 4. Click the Enable radio button in the Access Gateway Mode section. 5. Click Apply. 6. Click Yes to restart the switch in Access Gateway mode. Access Gateway Administrator's Guide 2-3 Publication Number: 53-1000430-01
Access Gateway Administrator’s Guide
2-3
Publication Number: 53-1000430-01
Enabling Access Gateway mode
2
The Switch Admin module displays as shown below.
3.
Click the
Disable
radio button in the
Switch Status
section.
4.
Click the
Enable
radio button in the
Access Gateway Mode
section.
5.
Click
Apply
.
6.
Click
Yes
to restart the switch in Access Gateway mode.
Note
To save the switch configuration, go to the
Configure > Upload/Download
subtab and upload the
configuration file before proceeding with the next step.