HP StorageWorks 2/32 Brocade Access Gateway Administrator's Guide - Supporting - Page 29
Disabling Access Gateway mode, Using Web Tools to Disable Access Gateway mode
View all HP StorageWorks 2/32 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 29 highlights
Disabling Access Gateway mode 3 Disabling Access Gateway mode Access Gateway mode transforms the switch into a device management tool. After Access Gateway mode is disabled, the switch starts in Fabric OS Native mode, and the standard set of Fabric OS commands are available. Disable Access Gateway mode using one of the following methods: • "Using Web Tools to Disable Access Gateway mode" on page 3-3 • "Using the CLI to disable Access Gateway mode" on page 3-4 Using Web Tools to Disable Access Gateway mode After you disable Access Gateway mode, use the instructions in the Web Tools Administrator's Guide to reconfigure the switch and join it to the fabric. To disable Access Gateway mode 1. Open a Web Tools session directly on the Brocade Access Gateway. The switch appears in the Switch View. 2. Click the Admin button on the Switch View. The Switch Admin module displays. Note To save the switch configuration, go to the Configure > Upload/Download subtab and upload the configuration file before proceeding with the next step. 3. Click the Disable radio button in the Switch Status section. 4. Click the Disable radio button in the Access Gateway Mode section. 5. Click Apply. 6. Click Yes to restart the switch in Fabric OS Native mode. Access Gateway Administrator's Guide 3-3 Publication Number: 53-1000430-01