HP StorageWorks 2/32 Brocade Fabric Watch Administrator's Guide (53-1000243-01 - Page 45
SNMP-Based Enterprise Managers
View all HP StorageWorks 2/32 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 45 highlights
Accessing Fabric Watch 2 SNMP-Based Enterprise Managers Use SNMP-based enterprise managers to: • Query the MIB variable for individual fabric and switch elements. • Query and modify threshold and alarm configurations. • Receive alarm notification via SNMP traps. • View and configure the mail database. Note The following instructions apply to the AdvantNet MIB browser. There may be some variation in the procedures when other MIB browsers are used. To configure Fabric Watch with an SNMP-based enterprise manager, begin by connecting to the switch using a MIB browser: 1. Open a MIB browser. 2. Load the appropriate MIB files if you have not already done so. First load the Brocade common MIB file, followed by the Brocade software MIB file. The system should respond with a screen similar to the following: The MIB browser has populated the left side of the screen with a MIB tree that you can navigate. 3. Begin a telnet session with the switch and type the agtCfgSet command. For information on the agtCfgSet command, see the Fabric OS Command Reference. 4. Type the IP address for the switch into the Host field. Type the community into the Community field. Type the write community into the Write Community field, if you want to perform set operations. Fabric Watch Administrator's Guide 2-5 Publication Number: 53-1000243-01