HP StorageWorks 4/16 Brocade Fabric OS Message Reference Supporting Fabric OS - Page 215

27 FSS-1006 FSS-1006 Message , [FSS-1006], ,, WARNING, , No FSS message available Probable Cause Indicates that data is not available on the Fabric OS state synchronization (FSS) device. Recommended If the message persists, run supportFtp (as needed) to set up automatic FTP transfers; then run the Action supportSave command and contact your switch service provider. Severity WARNING FSS-1007 Message , [FSS-1007], ,, CRITICAL, , : Faulty Ethernet connection. Probable Cause Indicates that the Ethernet connection between the active control processor (CP) and standby CP is not healthy. The error occurs when the standby CP does not respond to a request from the active CP within 5 seconds. This usually indicates a problem with the internal Ethernet connection and a disruption of the synchronization process. Recommended Action Check the Ethernet connection between active CP and standby CP (interface eth1) by issuing net commands such as ifconfig eth1 (as root) or run supportShow/supportSave to validate the network configuration; then try to restore the synchronization by issuing the haSyncStart command. If the problem persists, contact your switch service provider. Severity CRITICAL Fabric OS Message Reference 163 53-1000600-01