HP StorageWorks 4/16 Brocade Fabric OS Message Reference Supporting Fabric OS - Page 348

43 FCR-1021 To do that, perform the following steps: 1. Run portDisable to disable all the EX_Ports that got this error message. 2. Run portDisable to disable all the other EX_Ports on that FCR connected to the same edge fabrics the EX_ports disabled in step 1 are connected to. 3. Use Zoning commands on the edge fabrics, to reduce the LSAN zone entries on the edge fabrics. 4. Run portEnable on each EX_Port, one at a time, to reenable the EX_Ports, and verify that this error is not reported again. Severity WARNING FCR-1021 Message , [FCR-1021], ,, WARNING, , Local LSAN device entries exhausted. Probable Cause Indicates that the number of devices created through logical storage area network (LSAN) zones within the MetaSAN exceeds the local LSAN zone database limitations. Recommended Remove excess device entries within LSAN zones so that the number of devices is within the range Action of the local zone database limitations. Severity WARNING FCR-1022 Message , [FCR-1022], ,, ERROR, , Local proxy device slot entries exhausted. Probable Cause Indicates that the resources used to persistently store the proxy device slot to the remote world-wide name (WWN) have been consumed. Recommended Remove the proxy device slots by using the fcrProxyConfig command or limit proxy devices by Action removing logical storage area network (LSAN) zone entries. Severity ERROR FCR-1023 Message Probable Cause , [FCR-1023], ,, WARNING, , Local phantom port WWN entries exhausted. Indicates that the number of port world-wide names (WWNs) in use exceeds the local port WWN resources. 296 Fabric OS Message Reference 53-1000600-01