HP StorageWorks 4/16 Brocade Fabric OS Message Reference Supporting Fabric OS - Page 501

70 SWCH-1007 SWCH-1007 Message , [SWCH-1007], ,, WARNING, , Switch port disabled due to \"\". Probable Cause Indicates that the switch port is disabled due to the reason displayed in the message. Recommended Action Based on the disable reason displayed, proper corrective action may to be required to restore the port. If insufficient frame buffers is the disable reason, reduce the distance or speed settings for the port to reduce the buffer requirement of the link. Alternatively, one or more ports in the port group must be disabled to make more buffers available for the link. Please refer to the Fabric OS Administrator's Guide for more information about buffers. Severity WARNING SWCH-1008 Message , [SWCH-1008], ,, WARNING, , are port swapped on ports that do not support port swap. Slot will be faulted. Probable Cause Indicates that the blade is enabled with the port configuration that already has area swapped. Recommended Action Replace the blade with ports that support port swap. Then port swap the ports back to ports default area. Refer to the Fabric OS Administrator's Guide for more information on port swapping. Severity WARNING Fabric OS Message Reference 449 53-1000600-01