HP StorageWorks 4/16 Brocade Fabric OS MIB Reference Guide v6.0.0 (53-1000602- - Page 24

1 Loading Brocade MIBs 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.11.5 where: 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.11 is the OID (of swFCPortTxWords) and 5 is the instance ID for port 4. You must add 1 to the port number to get its instance number in SNMP because SNMP numbering starts at 1; switch port numbering starts at 0. Loading Brocade MIBs The Brocade MIB is a set of variables that are private extensions to the Internet standard MIB-II. The Brocade agents support many other Internet-standard MIBs. These standard MIBs are defined in RFC publications. To find specific MIB information, examine the Brocade proprietary MIB structure and the standard RFC MIBs supported by Brocade. BROCADE MIB FILES The Brocade MIB files are as follows: • BRCD_v5_0.mib • SW_v5_5.mib • FA_v3_0.mib • FE_RFC2837.mib • ENTITY_RFC2737.mib • HA_v5_1.mib • FICON_v5_0.mib • CPQ_HOST.mib • CPQ_RACK.mib • FCIP.mib • iSCSI.mib BEFORE LOADING MIBS Before loading Brocade MIB files, ensure that you have the correct version of SNMP for your Fabric OS version (see Table 2). TABLE 2 Firmware Fabric OS Supported SNMP Versions SNMPv1 SNMPv2 SNMPv3 Fabric OS v2.6.2 and previous Yes No1 No Fabric OS v3.2.0 and previous Yes No1 No Fabric OS v4.2.0 and previous Yes No1 No Fabric OS v4.4.0 Yes No1 Yes2 Fabric OS v5.x Yes Yes3 Yes2 Fabric OS v6.0.0 Yes Yes Yes 1. The corresponding Fabric OS has SNMPv2 capabilities, but it is not officially supported by Brocade. 6 Fabric OS MIB Reference 53-1000602-01