HP StorageWorks 4/16 Brocade Fabric OS MIB Reference Guide v6.0.0 (53-1000602- - Page 240
connUnitPortModuleType 1.3.6.1.3.94.1.10.1.9
View all HP StorageWorks 4/16 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 240 highlights
8 connUnitPortModuleType 1.3.6.1.3.94.1.10.1.9 For an external FC_Port, this value should be 9 (shortwaveNoOFC), 8 (longwaveNoOFC), or 6 (copper). connUnitPortModuleType 1.3.6.1.3.94.1.10.1.9 Values The module type of the port connector. Possible values are: • unknown (1) • other (2) • gbic (3) • embedded (4) Fixed (oneXnine) • glm (5) • gbicSerialId (6) • gbicNoSerialId (7) • gbicNotInstalled (8) • smallFormFactor (9) For an external FC_Port with GBIC, this value is set to 6 (gbicSerialId) or 7 (gbicNoSerialId). For an external FC_Port without GBIC, this value is set to 8 (gbicNotInstalled). connUnitPortWwn 1.3.6.1.3.94.1.10.1.10 The World Wide Name of the port, if applicable; otherwise, an empty string. This is in IEEE Extended format, and the extension contains the internal port number of each port. NOTE The internal port number is 1 less than the port index. For example, if the switch has WWN 10:00:00:60:69:10:02:18, then port numbers 0 and 6 have WWN 20:00:00:60:69:10:02:18 and 20:06:00:60:69:10:02:18, respectively. However, the embedded port has WWN 10:00:00:60:69:10:02:18, the same as the switch. connUnitPortFCId 1.3.6.1.3.94.1.10.1.11 This is the assigned Fibre Channel ID of this port. This value is expected to be a Big Endian value of 24 bits. If this is a loop, then it is the AL_PA that is connected. If this is an E_Port, then it contains only the domain ID, left justified, 0 filled. If this port does not have a Fibre Channel address, return all bits set to 1. For an F_Port, this is the Fibre Channel ID to which the connected N_port is assigned. For an FL_Port, this is the Fibre Channel ID of the FL_Port (alpa = 0). For a U or E_Port, this is similar to F_Port. 222 Fabric OS MIB Reference 53-1000602-01