HP StorageWorks 4/16 HP StorageWorks Fabric OS 6.0.1a release notes (AA-RWFMA- - Page 16

Additional Fabric OS 6.x enhancements Additional Fabric OS 6.x enhancements include: • Provides new Fabric OS commands to rename an alias, a zone and a zone configuration. Zone -copy copies the zone object to a new zone object. Zoneobjectrename renames the zone object. • Detects and handles a corrupted zone configuration [under /etc/fabos/zone*] gracefully instead of rebooting. The switch also logs the error in RASLog. • Adds a new command that provides both the WWN and serial number of the switch. Added an -sn option to display the serial number. For example, wwn -sn will return both the world wide name and serial number data • Provides additional information on a faulty port in Fabric Watch to aid in troubleshooting. • Enables use of passive FTP to download firmware. • Enables the customer to specify a quality password policy that prevents the selection of passwords with consecutive, identical characters. • Uses multiple NTP servers with the tsclockserver command for redundancy. For example, if one site NTP server fails (DR scenario) there is a backup that can be reached by the switches. • Logs a RASLog message when a 2.x switch joins the fabric. • HA failover and user notification occurs on the 4/256 SAN Director when there is a failed Ethernet chip (Oscillator chip). Fabric OS 6.0.0 fixes Table 5 lists defects closed in the Fabric OS 6.0.0 firmware release. Table 5 Fabric OS 6.0.0 closed defects Closed defect summary Solution iSCSI: connection redirection not functioning: enabled on slot 10, after discovery login and sendtarget = all, only provides one target portal. Fixed in Fabric OS 6.0.0 400 Multi-protocol Router and FR4-18i may drop frames under high stress bi-directional FCR traffic conditions. Fixed in Fabric OS 6.0.0 ipperf configurations are not getting cleared on executing HA failover with ipperf running in parallel. Fixed in Fabric OS 6.0.0 CUP Port fails to come online on a 400 Multi-protocol Router due to F-Rej to PLOGI to the CUP Port. Fixed in Fabric OS 6.0.0 Linux 2.6 iSCSI initiator is not able to discover a third party storage array. Fixed in Fabric OS 6.0.0 Cannot fail back after performing a Path Failover with certain third-party multi-pathing software. It works with iSCSI GE ports, but not on FC. Fixed in Fabric OS 6.0.0 iSCSI - QLogic HBA Card not supported. Use the Alacritech SES1001T iSCSI Accelerator instead. Fixed in Fabric OS 6.0.0 Host I/O fails during READ Buffer Compare when injecting 1% packet loss on GigE link with Qlogic iSCSI 4052C driver 2.1.3.8, fw 2.0.0.7. Fixed in Fabric OS 6.0.0 Added new CLI command to Help: fcrlsanmatrix. Command added in Fabric OS 6.0.0 Multiple copies of SAK IRNDUP from one Host hang with CE/DE/Busy status on a 400 Multi-protocol Router. Fixed in Fabric OS 6.0.0 supportsave with scp option is looking for user authentication to transfer every file. Fixed in Fabric OS 6.0.0 16