HP StorageWorks 4/16 HP StorageWorks Fabric OS 6.0.1a release notes (AA-RWFMA- - Page 20
On a 4/256 SAN Director, Web Tools shows DHCP is on. User
View all HP StorageWorks 4/16 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
Closed defect summary Solution Example for setting IPv6 address in the help page of ipaddrset command needs update. Fixed in Fabric OS 6.0.0 Discovery Domain does not show all the DD's that are members of DDSET when configured from usability wizard. Fixed in Fabric OS 6.0.0 On the "Configure DD" screen, when adding a new Discovery Domain (DD) and adding VT and VI, it also adds VT and VI from the existing DD. Fixed in Fabric OS 6.0.0 In "Zoneadmin" role, when ADs are configured, "set default mode" option (under zoning actions tab) should be disabled. Fixed in Fabric OS 6.0.0 If an active ipv4 policy has "80 accepted; 80 denied; and 443 accepted," both http and https are disabled on the switch. Fixed in Fabric OS 6.0.0 On a 4/256 SAN Director, Web Tools shows DHCP is on. User cannot change IP address from Web Tools since it blocks the static IP address change when DHCP is enabled. Fixed in Fabric OS 6.0.0 Firmware upgrade on 400 Multi-protocol Router from Fabric OS 5.1.1b to 5.3.0_rel_bld46 results in segmentation fault message. Fixed in Fabric OS 6.0.0 During firmwaredownload process, creating an IP interface while BP code is still loading may result in kernal panic. Fixed in Fabric OS 6.0.0 MIBS: Walk and Table View shows different outputs for the same table. Fixed in Fabric OS 6.0.0 NPIV failed to work after firmware is upgraded from pre- Fabric OS 5.1.0 to Fabric OS 5.1.0 or higher. Downgrade and upgrade resolve the problem. Fixed in Fabric OS 6.0.0 Unexpected menu appears after Customize Report tab selected in Fabric Watch from GUI. Fixed in Fabric OS 6.0.0 Ports did not link up on a specific 3rd party host/HBA after hosts were rebooted. Switch not ready for F or L ports. Fixed in Fabric OS 6.0.0 Need a command to query aptpolicy of application blades. Fixed in Fabric OS 6.0.0 Need to update Help page for the new aptpolicy -ap command. Fixed in Fabric OS 6.0.0 aptpolicy -ap command needs to validate command line argument. Fixed in Fabric OS 6.0.0 Web Tools: Fabric Events window cannot collect info from other switches connected to the fabric. Fixed in Fabric OS 6.0.0 Web Tools shows internal ports for embedded switch supporting an E-Port, which is inconsistent with the CLI. Fixed in Fabric OS 6.0.0 While configuring FCIP tunnel through FCIP wizard, the SAN connection drop down menu shows only one option-SAN extension. There should be two other options- "FCR Edge fabric" and "FCR backbone fabric" Fixed in Fabric OS 6.0.0 Help/man for portcfglongdistance should be edited to include FC10-6 information. Fixed in Fabric OS 6.0.0 20