HP StorageWorks 4/32 Brocade Fabric OS Message Reference guide v6.2.0 (53-1001 - Page 236
FCR-1083, FCR-1084, FCR-1085, FCR-1086
View all HP StorageWorks 4/32 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 236 highlights
27 FCR-1083 FCR-1083 Message , [FCR-1083], ,, WARNING, , The resume message is rejected by the domain . Probable Cause During the Coordinated HotCode protocol, a switch in the fabric has rejected the pause message which prevented the protocol from completing. Any data traffic disruption observed during the firmware download may have been due to the rejected resume message. Recommended Action Severity WARNING FCR-1084 Message , [FCR-1084], ,, WARNING, , The resume retry count is exhausted for the domain . Probable Cause During the Coordinated HotCode protocol, a switch in the fabric did not accept the resume message which prevented the protocol from completing. Any data traffic disruption observed during the firmware download may have been due to this issue. Recommended Action Severity WARNING FCR-1085 Message , [FCR-1085], ,, ERROR, , HA sync lost as remote CP does not support FCR based matrix. Probable Cause Indicates that the remote control processor (CP) has older firmware, which does not support FCRbased matrix while the local CP has the feature enabled. This is causing the loss of the high-availability (HA) synchronization. Recommended Disable FCR-based matrix or upgrade the remote CP. Action Severity ERROR FCR-1086 Message Probable Cause , [FCR-1086], ,, ERROR, , HA sync lost as remote CP does not support Condor2 based EX_ports. Indicates that the remote control processor (CP) has older firmware, which does not support Condor-based EX_ port. This is causing the loss of the high-availability (HA) synchronization. 178 Fabric OS Message Reference 53-1001157-01