HP StorageWorks 8/80 HP StorageWorks Fabric OS 6.1.0a release notes (5697-7679 - Page 10
SAN Director blade support
View all HP StorageWorks 8/80 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
4/256 SAN Director blade support Fabric OS 6.1.x is fully qualified and supports the Director blades listed in Table 2. Table 2 4/256 SAN Director blade support matrix Director blade FC4-16 FC4-32 FC4-48 FC8-16 FC8-32 FC8-48 FC10-6 Number of blades Supported with any mix and up to eight of each. No restrictions around intermix. The 4/256 SAN Director must run Fabric OS 6.x or later to support the FC8-16 port blade and Fabric OS 6.1.x or later to support the FC8-32 and FC8-48 port blades. FC4-16IP (iSCSI blade) Up to a maximum of four blades of this type. FR4-18i (FCIP/FC Router blade) Up to a maximum of two blades of this type. Up to eight FR4-18i blades can be installed if they are used only for FC Fastwrite or FCIP without routing. DC Director blade support Fabric OS 6.1.x is fully qualified and supports the blades for the DC Director blades listed in Table 3. Table 3 DC Director blade support matrix Director blade FC8-16 FC8-32 FC8-48 FC10-6 Number of blades Supported with Fabric OS 6.1.0a and later with any mix (up to eight of each). No restrictions around intermix. FC4-16IP (iSCSI blade) Not supported in the DC Director FR4-18i (FCIP/FC Router blade) Supported with Fabric OS 6.1.0a and later, up to a maximum of four blades of this type. Up to eight FR4-18i blades can be installed if they are used only for FC Fastwrite or FCIP without routing. 10