HP StorageWorks 8/80 HP StorageWorks Fabric OS 6.2.0d release notes (5697-0353 - Page 43
Fabric OS 6.2.0a fixes
View all HP StorageWorks 8/80 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 43 highlights
Trying to enable a LUN on a member node fails stating 'Specified target not hosted by local node.' Fixed in Fabric OS 6.2.0. Configdownload fails for fdd.* parameters from Fabric OS 6.1.1 to 6.2.0 through CAL. Fixed in Fabric OS 6.2.0. With default zoning set to All Access, ACK frame with FC_type Extended Link can be dropped. Fixed in Fabric OS 6.2.0. Fabric OS 6.2.0a fixes The following table lists defects closed in the Fabric OS 6.2.0a firmware release. Table 9 Fabric OS 6.2.0a closed defects Closed defect summary Solution In a B2E routed environment, when the user executes the Pathinfo command in BB querying for xlate domain, the switch may panic. Fixed in Fabric OS 6.2.0a. Some OS/HBA combinations take down the FC link when N_portgenerated RSCNs are delivered by switch with 0x08 (Fabric OS 6.1.1b and 6.1.0g) or 0x20 (6.1.0x) as event qualifier. The fix reverts back to Fabric OS 6.0 value of 0x00. Fixed in Fabric OS 6.2.0a. Switches slowly leaked memory over an extended period while being managed by DCFM. Fixed in Fabric OS 6.2.0a. Fabric OS 6.2.0b fixes The following table lists defects closed in the Fabric OS 6.2.0b firmware release. Table 10 Fabric OS 6.2.0b closed defects Closed defect summary Solution CUP can fail to send CU-End to clear busy. CUP is still responsive, but the host is waiting for the CUE. Fixed in Fabric OS 6.2.0b. WWN card FRU replacement does not send async reports to FICON host, so that customers do not know when a WWN card has been removed. Fixed in Fabric OS 6.2.0b. Customers may experience high CPU load and unexpected blade errors due to an ASIC-generated interrupt handling problem. Fixed in Fabric OS 6.2.0b. Unable to configure ports using configdownload if the ports are not physically present in the director (blade not plugged in). Fixed in Fabric OS 6.2.0b. On HP StorageWorks DC SAN Director, after running fosconfig --enable vf, followed by fosconfig --disable vf, customer cannot log in via Telnet or serial port, and a Cannot assign valid AD at the login session error occurs. Workaround prior to upgrade: Do not change VF mode until dual CP chassis is in sync Fixed in Fabric OS 6.2.0b. . HP StorageWorks Fabric OS 6.2.0d release notes 43