HP StorageWorks MSA 2/8 HP StorageWorks MIB V3.1.x/4.1.x Reference Guide (AA-R - Page 151

FE MIB Objects fcFxPortPhysOperStatus OID Description 1.3.6.1.3.42.2.1.2.3.1.4 The current operational status of the FxPort. Possible values are: online (1): Login may proceed. offline (2): Login cannot proceed. testing (3): Port is under test. link-failure (4): Failure after online/testing. The testing (3) indicates that no operational frames can be passed. If fcFxPortPhysAdminStatus is offline (2) then fcFxPortPhysOperStatus should be offline (2). If fcFxPortPhysAdminStatus is changed to online (1), then fcFxPortPhysOperStatus should change to 1 (online) if the FxPort is ready to accept Fabric Login request from the attached NxPort; it should proceed and remain in the link-failure (4) state if and only if there is a fault that prevents it from going to the online (1) state. fcFxPortPhysLastChange OID Description 1.3.6.1.3.42.2.1.2.3.1.5 The value of sysUpTime at the time the FxPort entered its current operational status. A value of zero indicates that the FxPort's operational status has not changed since the agent last restarted. fcFxPortPhysRttov OID Description 1.3.6.1.3.42.2.1.2.3.1.6 The Receiver_Transmitter_Timeout value of the FxPort. This is used by the receiver logic to detect Loss of Synchronization. FxPort Fabric Login Table This table contains one entry for each FxPort in the Fabric Element, and the Service Parameters that have been established from the most recent Fabric Login, whether implicit or explicit. MIB Version 3.1.x/4.1.x Reference Guide 151