HP StorageWorks MSA 2/8 HP StorageWorks MIB V3.1.x/4.1.x Reference Guide (AA-R - Page 219

SW-MIB Objects swBeaconAdmStatus OID Description 1.3.6.1.4.1.1588.2.1.1.1.1.19 The desired status of the switch beacon. When the beacon is set to on, the LEDs on the front panel of the switch run alternately from left to right and right to left. The color is yellow. When the beacon is set to off, each LED will be in its regular status, indicating color and state. Possible values are: on (1): The LEDs on the front panel of the switch run alternately from left to right and right to left. Set the color to yellow. off (2): Set each LED to its regular status, indicating color and state. swDiagResult OID Description 1.3.6.1.4.1.1588.2.1.1.1.1.20 The result of the power-on startup (POST) diagnostics. Possible values are: sw-ok (1): The switch is okay. sw-faulty (2): The switch has experienced an unknown fault. sw-embedded-port-fault (3): The switch has experienced an embedded port fault. swNumSensors OID Description 1.3.6.1.4.1.1588.2.1.1.1.1.21 The number of sensors inside the switch. Note: For HP switches the values are as follows: Core Switch 2/64: This value is between 1 and 62. (The configurations for this switch vary too greatly to list them for each specific type of sensor.) SAN Switch 2/16: This value is between 1 and 13 (temperature = 6, fan = 3, power supply = 4). For Fabric OS v4.x, if no sensor is available, this variable is assigned the value -1. MIB Version 3.1.x/4.1.x Reference Guide 219