HP Surestore Tape Library Model 10/180 56 Cartridge Array Installation Instruc - Page 1

HP Surestore Tape Library 10/180 56 Cartridge Array Installation Instruction (for HP Field Service Use Only) CAUTION: Remote resolution must be attempted prior to authorization of on-site service. Note to Customer Engineer: This installation may add new technology to the library that older user's guides do not address. Please remind the customer that the latest user documentation is available from the HP Customer Care website: http://www.hp.com/go/ support. s Materials Included Table 1. Materials List Part Cartridge Array Installation Guide Cartridge Unit 6-cell Array Retainer Clips Retainer Labels Quantity 1 1 10 2 2 s Installation Notes • Confirm with the customer System Administrator that the tape library can be powered off. • Observe proper power down and power on procedures, as described in the Installation or Service Manual. • If you install or replace a Cartridge Array, you must mark the appropriate box on the Drive Location Label. The Drive Location Label is located on the inside of the rear library door, just below the UL label. 62213 1