HP Tc4400 Drives - Windows Vista - Page 14

External drives Optional external devices ✎ For information about required software, drivers, and which port on the computer to use, refer to the documentation included with the device. To connect a standard external device to the computer: 1. If you are connecting a powered device, turn off the device. 2. Connect the device to the computer. 3. If you are connecting a powered device, plug the device power cord into a grounded electrical outlet. 4. Turn on the device. To disconnect a standard external device from the computer, turn off the device, and then disconnect it from the computer. Optional external MultiBay devices An external MultiBay or MultiBay II connects to the computer USB port and enables you to use MultiBay and MultiBay II devices. The computer provides one powered USB port on the right side. This port provides power to the external MultiBay when used with a powered USB cable. The USB ports on the rear panel and left side of the computer do not provide power to the external MultiBay. External MultiBays connected to these USB ports must also be connected to AC power. For more information about the external MultiBay, refer to the documentation that is included with the device. 4-2 Drives