HP Tc4400 Memory Modules - Windows Vista - Page 16
into the memory module slot until it is seated., down, applying
UPC - 883585078639
View all HP Tc4400 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
Adding or replacing memory modules 17. Insert the new memory module: a. Align the notched edge 1 of the memory module with the tab in the memory module expansion slot. Ä To prevent damage to the memory module, hold the memory module by the edges only. Do not touch the components on the memory module. b. With the memory module at a 45-degree angle from the surface of the memory module compartment, press the module 2 into the memory module slot until it is seated. c. Gently press the memory module 3 down, applying pressure to both the left and right edges of the memory module, until the retention clips snap into place. 14 Memory Modules
14
Memory Modules
Adding or replacing memory modules
17. Insert the new memory module:
a.
Align the notched edge
1
of the memory module with the
tab in the memory module expansion slot.
Ä
To prevent damage to the memory module, hold the memory
module by the edges only
.
Do not touch the components on
the memory module.
b.
With the memory module at a 45-degree angle from the
surface of the memory module compartment, press the
module
2
into the memory module slot until it is seated.
c.
Gently press the memory module
3
down, applying
pressure to both the left and right edges of the memory
module, until the retention clips snap into place.