HP Value Microportable Projector MP1400 Compaq MP1400 Microportable Projector - Page 18
Powering On the Projector
View all HP Value Microportable Projector MP1400 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 18 highlights
Powering On the Projector Follow these instructions to power on the projector: 1. Ensure that the power cord and signal cable are securely connected. Make sure the projector is perpendicular to the projection screen. 2. Remove the lens cap 1 from the projector by pulling it straight out. 3. Turn on the Main power switch 2 on the back of the projector and allow the projector to warm up for one to two minutes. When the projector has warmed up, the Compaq startup screen displays, and the LED on the STANDBY button 3 turns green. MP1400 Microportable Projector 1-11
MP1400 Microportable Projector
1-11
Powering On the Projector
Follow these instructions to power on the projector:
1.
Ensure that the power cord and signal cable are
securely connected.
Make sure the projector is perpendicular to the projection
screen.
2. Remove the lens cap
1
from the projector by pulling
it straight out.
3. Turn on the Main power switch
2
on the back of the
projector and allow the projector to warm up for one
to two minutes.
When the projector has warmed up, the Compaq startup
screen displays, and the LED on the
STANDBY
button
3
turns
green.