HP Value Microportable Projector MP1400 Compaq MP1400 Microportable Projector - Page 27

Projector Buttons (Continued) Symbol 3 − 4 + 5 R Control Minus button Plus button Resync button Function Selects and adjusts the on-screen menu functions. Selects and adjusts the on-screen menu functions. Automatically synchronizes the projector to track the input source. IMPORTANT: To use standby mode, press the Standby button and, after a 6- to 10-second delay, the unit enters standby mode and the projector lamp turns off. A "Going to Standby" message appears on the screen for the duration of the 6- to 10-second delay. When the message disappears from the screen, there is a 45-second delay before the lamp can be turned back on. Wait 45 seconds to allow the lamp to cool before pressing the Standby button again. Introducing the On-Screen Menu The adjustments for screen settings are located in the on-screen menu and can be viewed in one of seven available languages. Analog On-Screen Menu Adjustments To display the Analog on-screen menu, press the Select button on the projector. The following table shows the functions at each level: Analog Menu Brightness Contrast Position Zoom Keystone Picture Analog Menu Level 2 Adjustment scale Adjustment scale Horizontal Position Vertical Position Save and Return Cancel Zoom Panning Left-Right Panning Up-Down Save and Return Cancel Adjustment scale Dark-Light
Analog Menu Level 3 Adjustment scale Adjustment scale Adjustment scale Adjustment scale Adjustment scale Continued
2-2 MP1400 Microportable Projector