HP Visualize b1000 hp Visualize b1000 and c3000 workstations owner's guide (a4 - Page 103
System Unit Power Supply, Propping Up the Power Supply
View all HP Visualize b1000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 103 highlights
Changing Your Computer Hardware Configuration System Unit Power Supply WARNING System Unit Power Supply This section will prove important to you as you begin to update your system unit. For example, you may need to install memory in your system unit. To do this, you need to position the power supply so you can get to the memory slots. This section will help you accomplish this task. To prevent injury, you need to unplug the system unit's power cord from the electrical outlet before servicing any components within the system unit. Figure 5-3 Propping Up the Power Supply To prop the power supply up, follow these steps: 1. Lay the system unit on its right side (using the front panel as your reference) and on a cushioned surface to avoid cosmetic damage to the system unit's exterior. 2. Open the left side panel of the system unit by following the procedure in the section "Opening the Left Side Panel of the System Unit" in this chapter. 3. Unscrew the two captive screws on the power supply chassis as shown in Figure 5-3 using a T-15 Torx driver. Unscrewing the Power Supply Captive Screws Power Supply Handle Power Supply Captive Screws Chapter 5 103