HP Visualize b1000 hp Visualize b1000 and c3000 workstations owner's guide (a4 - Page 179

The Boot Console Interface Displaying and Setting Paths Table 6-1 Table 6-2 Displaying and Setting Paths A path is the hardware address of a device that is attached to the I/O system of your computer. The path command sets the system paths shown in Table 6-1. The path command sets and displays the hardware address of a specified device attached to the I/O bus of your computer. System Paths Path Type primary or pri alternate or alt console or con keyboard or key Device Your computer's default boot device (usually the root disk) Your computer's alternate boot device (usually a DDS-format tape device) Your computer's primary display device Your computer's primary input ASCII device To display the current settings for the system paths, type the following at the prompt and press Enter: Main Menu: Enter command> path The paths are displayed in Mnemonic Style Notation, as shown in Table 6-2. Mnemonic Style Notation for Boot Paths I/O Type Built-in LVD SCSI Built-in NSE SCSI Built-in LAN Built-in IDE Specification Format fwscsi.scsi_address.logical_unit_number scsi.scsi_address.logical_unit_number lan.server_address.init_timeout.io_timeout ide Chapter 6 179