HP Wireless Gateway hn200w HP Wireless Gateway hn200w - (English) User Guide - Page 77
MAC address clone, Start, command, winipcfg, ipconfig/all, Enter
View all HP Wireless Gateway hn200w manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 77 highlights
advanced MAC address clone A Media Access Control (MAC) address is a unique 12-digit identification code assigned to a hardware device. MAC address clone attaches the MAC address of the network card/adapter onto your Gateway that was connected to your cable or DSL modem during installation. This satisfies the requirement by some ISPs that you register this address with them. Select the Mac Address Clone tab of the Expert Interface to view the MAC Address Clone screen. ADVANCED: MAC Address Clone To clone the MAC address of your network card/adapter onto your Gateway: 1 From the Windows Start menu, select Run. 2 Type command in the Open: box. 3 Click OK. 4 At the DOS prompt, type one of the following: ❑ winipcfg for Windows 98 or Me ❑ ipconfig/all for Windows 2000 then press Enter. 77