HP Xw6200 Adaptec SCSI RAID 2120S: Installation Guide - Page 20
Installing The Controller, Configuring SCSI Devices
UPC - 882780333536
View all HP Xw6200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
2 Installing The Controller In this Chapter Configuring SCSI Devices 2-1 Installing the Controller 2-7 Creating a RAID 5 Without an Operating System 2-9 Configuring SCSI Devices When configuring devices for Adaptec SCSI RAID 2120S/2200S controllers, you may need to: ■ Decide how to position drives on the SCSI channel. ■ Select cables. ■ Provide adapters for devices that need them. ■ Configure termination on devices that offer termination, as required. ■ Set the controller for starting or booting the system. ■ Set the SCSI IDs. In general, drives used in a RAID configuration should be as alike as possible in terms of capacity and performance. 2-1
2-1
2
Installing The Controller
In this Chapter
Configuring SCSI Devices
When configuring devices for Adaptec SCSI RAID 2120S/2200S
controllers, you may need to:
■
Decide how to position drives on the SCSI channel.
■
Select cables.
■
Provide adapters for devices that need them.
■
Configure termination on devices that offer termination, as
required.
■
Set the controller for starting or booting the system.
■
Set the SCSI IDs.
In general, drives used in a RAID configuration should be as alike
as possible in terms of capacity and performance.
Configuring SCSI Devices
2-1
Installing the Controller
2-7
Creating a RAID 5 Without an Operating System
2-9