HP dv6-1245dx HP Pavilion dv6 Entertainment PC - Maintenance and Service Guide - Page 107

Power connector cable

Get HP dv6-1245dx - Pavilion - Laptop PDF manuals and user guides
UPC - 884962331248
View all HP dv6-1245dx manuals
Add to My Manuals
Save this manual to your list of manuals

Page 107 highlights

Remove the USB board: 1. Disconnect the USB board cable (1) from the LIF connector on the system board. 2. Remove the Phillips PM2.5×6.5 screw (2) that secures the USB board to the base enclosure. 3. Remove the USB board (3) from the base enclosure. Reverse this procedure to install the USB board. Power connector cable NOTE: The power connector cable is available in the Cable Kit, spare part number 512832-001. Before removing the power connector cable, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC Adapter from the computer. 4. Remove the battery (see Battery on page 59). 5. Remove the following components: a. Hard drive (see Hard drive on page 69). b. Optical drive (see Optical drive on page 62). c. Switch cover and keyboard (see Switch cover and keyboard on page 76). d. Display assembly (see Display assembly on page 81). e. Top cover (see Top cover on page 91). f. USB board (see USB board on page 98). g. System board (see System board on page 101). Component replacement procedures 99

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
Remove the USB board:
1.
Disconnect the USB board cable
(1)
from the LIF connector on the system board.
2.
Remove the Phillips PM2.5×6.5 screw
(2)
that secures the USB board to the base enclosure.
3.
Remove the USB board
(3)
from the base enclosure.
Reverse this procedure to install the USB board.
Power connector cable
NOTE:
The power connector cable is available in the Cable Kit, spare part number 512832-001.
Before removing the power connector cable, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
then unplugging the AC Adapter from the computer.
4.
Remove the battery (see
Battery
on page
59
).
5.
Remove the following components:
a.
Hard drive (see
Hard drive
on page
69
).
b.
Optical drive (see
Optical drive
on page
62
).
c.
Switch cover and keyboard (see
Switch cover and keyboard
on page
76
).
d.
Display assembly (see
Display assembly
on page
81
).
e.
Top cover (see
Top cover
on page
91
).
f.
USB board (see
USB board
on page
98
).
g.
System board (see
System board
on page
101
).
Component replacement procedures
99