HP t5630 TeemTalk 7.0 User Manual - Page 159

Defining Function Keys IBM 3151 Emulation The keys mapped as F1 through F12 can be redefined from the keyboard or by the host. The function keys can store up to 128 characters between them and can include escape sequences and ASCII control characters in addition to character strings. Here we describe how to define a function key from the keyboard. 1 Press the keys Shift + Esc. to display the Define F key line along the bottom of the screen. The line has two user-entry fields. The small first field specifies the F key to be defined, and the second field is where the programmed contents is entered and displayed. 2 Specify the function key to be defined by entering a two-digit number in the first field, for example, 01 for F1, 12 for F12, then press Enter. The second field will display the current definition of the function key. 3 In the second field, enter the new definition for the function key. This can include a character string, escape sequence or control characters. A control character is entered by typing its keyboard equivalent. For example, the CR (carriage return) character is entered by pressing Ctrl + M. You can erase the character at the current cursor position by pressing the keys Ctrl + 2. If you want to restore the default definition, press the Clear key. 4 Press the Send key to store the key definition. The Define F key line will be cleared to allow you to enter the next key definition. If you do not want to save the definition, press Shift + Esc instead of Enter. Defining Function Keys 143