HP t5630 TeemTalk 7.0 User Manual - Page 48

Host Connection Baud Rate Factory default: 9600 Specifies the connection speed in the range 110 to 115200 baud. Parity Factory default: None This option specifies the parity mode for each transmitted character. If the number of data bits specified by Word Length is 8, set this option to None. Selecting Odd will cause an eighth bit to be added with a value of 1 if the previous 7 bits add up to an even number, and 0 if the previous 7 bits add up to an odd number. Selecting Even will cause an eighth bit to be added with a value of 1 if the previous 7 bits add up to an odd number, and 0 if the previous 7 bits add up to an even number. Mark parity will set every eighth bit to 1 and Space parity every bit to 0. Word Length Factory default: 8 This option specifies the number of data bits sent for each transmitted character. Stop Bits Factory default: 1 This specifies the number of stop bits sent for each transmitted character. Flow Control Factory default: Both This option specifies the type of flow control used by the line port to communicate readiness to transmit or receive data from the host. None Input Output No flow control. XON/XOFF on received data. XON/XOFF on transmitted data. 32 Serial Transport