Hitachi 32PD7800 Owners Guide - Page 16

INSTALLATION INSTRUCTIONS (continued) Connecting to a PC (1) Make sure that the display signal of the personal computer to be used is compatible with the specifications of this device. • See "Product Specifications" concerning the specifications of this device. 53 ȁ 57 (2) Make sure that the power switch of the personal computer is turned off. (3) Connect the signal input terminal (RGB 1 or RGB 2) on the rear panel of this device to the display signal output terminal of the personal computer. • Use a cable that fits the input terminal of this device and the output terminal of the personal computer. • Depending on the type of personal computer being connected, the use of an optional conversion adapter or the adapter provided with the personal computer may be necessary in some cases. For details, refer to the instruction manual of the personal computer or ask the personal computer manufacturer or your local retail dealer. Speaker (R) Monitor (rear panel) Speaker (L) Power cable connector Power cord (DVI) (D-sub) 3.5mm Stereo mini jack Connecting to a PC Device To signal output terminal (DVI) To signal output terminal (D-sub) To audio output terminal PC Connecting to an Audio Visual Device To signal output terminal (DVI) To audio output terminal (Example) DVD Player • Setting RGB1: DVI-PC RGB2: RGB For details, refer to 56 ȁ 57 • Setting RGB1: DVI-STB RGB2: Component For details, refer to 55 ȁ 56 16