Hitachi DH18DLP4 Instruction Manual - Page 13
Prior To Operation
UPC - 717709011649
View all Hitachi DH18DLP4 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
English PRIOR TO OPERATION 1. Mounting the drill bit (Fig. 5, 6) CAUTION: To prevent accidents, make sure to turn the switch off. NOTE: When using tools such as drill bits, etc., make sure to use the genuine parts designated by our company. When using a bit which has big diameter, enlarge the center hole of the dust cup with this rotary hammer. ⅜ Installing dust collector (B) When using dust collector (B), insert dust collector (B) from the tip of the bit by aligning it to the groove on the grip. (Fig. 8) (1) Clean the shank portion of the drill bit. (2) Insert the drill bit in a twisting manner into the tool holder until it latches itself. (Fig. 5) The grip need not be adjusted during bit installation. (3) Check the latching by pulling on the drill bit. (4) To remove the drill bit, fully pull the grip in the direction of the arrow and pull out the drill bit. Dust cup Front cap Grip Fig. 7 Dust collector (B) Part of SDS-plus Drill bit shank Fig. 5 Grip Fig. 8 Part of SDS-plus Drill bit shank Fig. 6 2. Confirm that the battery is mounted correctly. 3. Installation of dust cup or dust collector (B) (Optional accessories) (Fig. 7, Fig. 8) When using a rotary hammer for upward drilling operations attach a dust cup or a dust collector (B) to collect dust or particles for easy operation. ⅜ Installing the dust cup Use the dust cup by attaching to the drill bit as shown in Fig. 7. CAUTION: ⅜ The dust cup and dust collector (B) are for exclusive use of concrete drilling work. Do not use them for wood or metal drilling work. ⅜ Insert dust collector (B) completely into the chuck part of the main unit. ⅜ When turning the rotary hammer on while dust collector (B) is detached from a concrete surface, dust collector (B) will rotate together with the drill bit. Make sure to turn on the switch after pressing dust cup on the concrete surface. When using dust collector (B) attached to a drill bit that has more than 190 mm of overall length, dust collector (B) cannot touch the concrete surface and will rotate. Therefore, please use dust collector (B) by attaching to drill bits which have 166 mm, 160 mm, and 110 mm overall length. ⅜ Dump particles after every two or three holes when drilling. ⅜ Please replace the drill bit after removing dust collector (B). 13