Hitachi DH18DLP4 Instruction Manual - Page 15

English Switch Fig. 11 Spring Fig. 12 Fig. 14 CAUTION: Do not look directly into the light. Such actions could result in eye injury. (4) Replacing the batteries (a) Loosen the hook screw with a phillips-head screwdriver (No. 1). (Fig. 15) Remove the hook cover by pushing in the direction of the arrow. (Fig. 16) (b) Remove the old batteries and insert the new batteries. Align with the hook indications and position the plus (+) and minus (-) terminals correctly. (Fig. 17) (c) Align the indentation in the hook main body with the protuberance of the hook cover, press the hook cover in the direction opposite to that of the arrow shown in Fig. 16 and then tighten the screw. Use commercially available AAAA batteries (1.5 V). Larger diameter faces away Hook Fig. 13 NOTE: Pay attention to the spring orientation. Install the spring with larger diameter away from you. (Fig. 13) (3) Using as an auxiliary light (a) Press the switch to turn off the light. If forgotten, the light will turn off automatically after 15 minutes. (b) The direction of the light can be adjusted within the range of hook positions 1 - 5. (Fig. 14) ⅜ Lighting time AAAA manganese batteries: approx. 15 hrs. AAAA alkali batteries: approx. 30 hrs. Screw Phillips-head screwdriver Fig. 15 15