Hitachi DH18DLP4 Instruction Manual - Page 22

English ⅷ Drilling holes in concrete or tile Drill Bit (Slender shaft) Outer dia. 1/8" (3.4 mm) 9/64" (3.5 mm) Drill Bit (Slender Shaft) Effective Length 1-25/32" (45 mm) 1-25/32" (45 mm) Overall Length 3-35/64" (90 mm) 3-35/64" (90 mm) Code No. 306369 306368 Adaptor for Slender Shaft Code No. 306370 SDS-plus Drill bit Outer dia. 5/32" (4.0 mm) 3/16" (5.0 mm) 7/32" (5.5 mm) 1/4" (6.5 mm) 9/32" (7.0 mm) 5/16" (8.0 mm) 11/32" (8.5 mm) 3/8" (9.0 mm) 15/32" (12.0 mm) 1/2" (12.7 mm) 9/16" (14.0 mm) 19/32" (15.0 mm) 5/8" (16.0 mm) Overall length 4-5/16" (110 mm) 4-5/16" (110 mm) 6-5/16" (160 mm) 4-5/16" (110 mm) 6-5/16" (160 mm) 6-5/16" (160 mm) 6-5/16" (160 mm) 6-5/16" (160 mm) 6-5/16" (160 mm) 6-1/2" (166 mm) 10-1/4" (260 mm) 6-1/2" (166 mm) 6-1/2" (166 mm) 6-1/2" (166 mm) 6-1/2" (166 mm) 10-1/4" (260 mm) Effective length 2" (50 mm) 2" (50 mm) 4" (100 mm) 2" (50 mm) 4" (100 mm) 4" (100 mm) 4" (100 mm) 4" (100 mm) 4" (100 mm) 4" (100 mm) 7-7/8" (200 mm) 4" (100 mm) 4" (100 mm) 4" (100 mm) 4" (100 mm) 7-7/8" (200 mm) Code No. 303571 303575 303578 303576 303581 303582 303584 303585 303586 303591 303606 303593 303595 303598 303599 303611 Dust cup Dust collector (B) Code No. 971787 306885 ⅷ Drilling anchor holes Drill Bit (Taper Shank) External dia. 7/16" (11 mm) 1/2" (12.3 mm) 1/2" (12.7 mm) 9/16" (14.3 mm) 9/16" (14.5 mm) Code No. 944460 944461 993038 944462 944500 Cotter: Code No. 944477 ⅷ Drilling holes in concrete Rotary hammer chuck Capacity 2.5-13mm Code No. 303332 Taper Shank Adaptor Taper mode Morse taper (No. 1) A-taper B-taper Code No. 303617 303619 303620 Applicable drill bit Drill bit (Taper shank) 7/16" (11 mm) 1/2" (12.3 mm) 1/2" (12.7 mm) 9/16" (14.3 mm) 9/16" (14.5 mm) Taper shank adaptor formed A-taper or B-taper is provided as an optional accessory, but drill bit for it is not provided. 22