Homelite UT10660 User Manual - Page 13
Mixing The Fuel, Filling The Fuel Tank
View all Homelite UT10660 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
OPERATION MIXING THE FUEL This product is powered by a 2-cycle engine and requires pre-mixing gasoline and 2-cycle lubricant. Pre-mix unleaded gasoline and 2-cycle engine lubricant in a clean container approved for gasoline. DO NOT mix quantities larger than usable in a 30-day period. Recommended fuel: This engine is certified to operate on unleaded gasoline intended for automotive use. NOTE: We recommend you use Homelite premium 2-cycle lubricant or an equivalent high-quality synthetic 2-cycle lubricant in this product. Mix at 2.6 oz. per gallon (US). Do not use automotive lubricant or 2-cycle outboard lubricant. HIGH QUALITY 2-CYCLE ENGINE LUBRICANT GASOLINE LUBRICANT 1.0 gal. (US) (3.8 liter) 2.6 oz. (76 ml) FILLING THE FUEL TANK See Figure 2. n Clean the surface around the fuel cap to prevent contamination. n Loosen the fuel cap slowly, by turning counterclockwise. n Carefully pour the fuel mixture into the tank. Avoid spillage. n Prior to replacing the fuel cap, clean and inspect the gasket. n Immediately replace the fuel cap and hand tighten, by turning clockwise. Wipe up any fuel spillage. n Move at least 30 ft. away from refueling area before starting the product. NOTE: It is normal for the engine to emit smoke during and after the first use. 50:1 GASOLINE & LUBRICANT MIX Fig. 2 Page 13 - English