Homelite UT26HBV User Manual - Page 15

Spark Plug Replacement, Storing The Product, High Altitude Engine Operation, Maintenance Schedule - carburetor

Page 15 highlights

MAINTENANCE performance. If performance improves when the fuel cap is loosened, check valve may be faulty or filter clogged. Replace fuel cap if required. SPARK PLUG REPLACEMENT This engine uses a Ryobi AC00160A, Champion RCJ-6Y, or equivalent spark plug with .025 in. electrode gap. Use a recommended or equivalent replacement and replace annually. STORING THE PRODUCT  Clean all foreign material from the product. Store idle unit indoors in a dry, well-ventilated area that is inaccessible to children. Keep away from corrosive agents such as garden chemicals and de-icing salts.  Abide by all ISO and local regulations for the safe storage and handling of gasoline. When storing 1 month or longer:  Drain all fuel from tank into a container approved for gasoline. Run engine until it stops. HIGH ALTITUDE ENGINE OPERATION Your engine is configured for operation below 2,000 feet altitude at the factory. Your engine must be reconfigured for operation above 2,000 feet altitude. Operating the engine with the wrong engine configuration at a given altitude may increase its emissions, decrease fuel efficiency, degrade performance, and cause irreversible damage. Engines configured for high altitude operation cannot be operated in standard altitude conditions. A qualified service center should ensure that your engine is properly configured for your location. THIS PRODUCT WAS MANUFACTURED WITH A CATALYST MUFFLER Congratulations! You have made an investment toward protecting the environment. In order to maintain this product's original emission level, please refer to the maintenance section below. MAINTENANCE SCHEDULE Maintenance Part Inspect for Damage Before Each Use Clean Every 5 Hours Replace Every 25 Hours or Yearly Replace Every 50 Hours * CATALYTIC MUFFLER ASSEMBLY...X SPARK SCREEN...X * AIR FILTER ASSY includes: Filter X * CARBURETOR ASSY includes: Gaskets X * FUEL TANK ASSY includes: Fuel Lines X Fuel Cap X Fuel Filter...X * IGNITION ASSY includes: Spark Plug...X * NOTICE: THE USE OF EMISSION CONTROL COMPONENTS OTHER THAN THOSE DESIGNED FOR THIS UNIT IS A VIOLATION OF FEDERAL LAW. Page 11 - English

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40

Page 11 — English
performance. If performance improves when the fuel cap
is loosened, check valve may be faulty or filter clogged.
Replace fuel cap if required.
SPARK PLUG REPLACEMENT
This engine uses a Ryobi AC00160A, Champion RCJ-6Y,
or equivalent spark plug with .025 in. electrode gap. Use
a recommended or equivalent replacement and replace
annually.
STORING THE PRODUCT
Clean all foreign material from the product. Store idle unit
indoors in a dry, well-ventilated area that is inaccessible
to children. Keep away from corrosive agents such as
garden chemicals and de-icing salts.
Abide by all ISO and local regulations for the safe storage
and handling of gasoline.
When storing 1 month or longer:
Drain all fuel from tank into a container approved for
gasoline. Run engine until it stops.
HIGH ALTITUDE ENGINE OPERATION
Your engine is configured for operation below 2,000 feet
altitude at the factory. Your engine must be reconfigured for
operation above 2,000 feet altitude. Operating the engine
with the wrong engine configuration at a given altitude may
increase its emissions, decrease fuel efficiency, degrade
performance, and cause irreversible damage. Engines
configured for high altitude operation cannot be operated
in standard altitude conditions. A qualified service center
should ensure that your engine is properly configured for
your location.
MAINTENANCE
THIS PRODUCT WAS MANUFACTURED WITH A CATALYST MUFFLER
Congratulations!
You have made an investment toward protecting the environment. In order to maintain this product’s
original emission level, please refer to the maintenance section below.
MAINTENANCE SCHEDULE
Inspect for
Clean
Replace
Replace
Maintenance
Damage Before
Every
Every 25 Hours
Every
Part
Each Use
5 Hours
or Yearly
50 Hours
* CATALYTIC MUFFLER ASSEMBLY
..........................................................................................................................
X
SPARK SCREEN
........................................................................................................................................................
X
* AIR FILTER ASSY
includes:
Filter
..........................................................................................
X
* CARBURETOR ASSY
includes:
Gaskets
...........................................
X
* FUEL TANK ASSY
includes:
Fuel Lines
........................................
X
Fuel Cap
.........................................
X
Fuel Filter
..........................................................................................................................
X
* IGNITION ASSY
includes:
Spark Plug
........................................................................................................................
X
*
NOTICE:
THE USE OF EMISSION CONTROL COMPONENTS OTHER THAN THOSE DESIGNED FOR THIS UNIT
IS A VIOLATION OF FEDERAL LAW.