Honeywell AQ1000TN2 Owners Guide - Page 11
Configuration switches
View all Honeywell AQ1000TN2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
Configuration switches The configuration (DIP) switches are located behind the thermostat faceplate. NOTE : DIP switch 1 is not used. Installer Configuration Menu (switch 2) Use DIP switch 2 to set the thermostat in either Installer or User mode. Temperature Control Mode (switches 3 & 4) Use DIP switches 3 and 4 to select the temperature control mode (A, F or AF). NOTE : F or AF mode should be used only when an external (floor) sensor is connected to the thermostat (see page 7). 8 69-2005EF
8
69-2005EF
The configuration (DIP) switches are located behind the
thermostat faceplate.
NOTE
: DIP switch 1 is not used.
Installer Configuration Menu (switch 2)
Use DIP switch 2 to set the thermostat in either Installer or
User mode.
Temperature Control Mode (switches 3 & 4)
Use DIP switches 3 and 4 to select the temperature control
mode (A, F or AF).
NOTE
: F or AF mode should be used only when an external
(floor) sensor is connected to the thermostat (see page 7).
Configuration switches